IBM 3745 Problem Determination Manual page 210

o
o
o
o
o
Unable to Power On
Power Control Display - 2
If Do
V
IE
Follow the procedure Qelow to find out
whether or not the 3745 is schedu led to
be powered on.
Power Control
~~~~J~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1
Power on and IPL the 3745 in local mode
2
• Press Power Control repeatedly until 3 is displayed.
• Press Validate.
Power on and log on the operator console. Refer to the 3745 Basic Operations
Guide. The following screen is displayed:
FUNCTI ON SELECTI ON RULES
TO SELECT ONE OF THE MENUS, PRESS THE APPROPRIATE F KEY
TO SELECT A FUNCTION, ENTER ITS 3-CHARACTER NAME THEN PRESS SEND
ONCE YOU HAVE SELECTED A FUNCTION FROM ONE MENU, YOU MAY SELECT
A FUNCTION FROM THE OTHER
TO END THE FUNCTION ON SCREEN, PRESS Fl
TO RETURN TO THE PENDING FUNCTION, PRESS F2
TO LOG OFF, ENTER OFF THEN PRESS SEND
===:>
IJ!lD
'it#·ltfflfj
F1:END F2:MENU2 F3:ALARM F4:MENUl
Chapter 4. Unable to Power On
4-3