IBM 3745 Problem Determination Manual page 306

o
o
o
o
o
Line Problem (HSS)
--------------------------------------------------------------------------------- mm/dd/yy hh: mm
FUNCTION ON SCREEN: LINE INTERF DSPL Y
- ENTER A DECIMAL LINE ADDRESS FROM 0 TO 1039
= =
>
LINE 1031 1 IN SCANNER 4 CCITT X21 WIDE BAND
a
CONTROL PROGRAM: NCP
LINE TYPE: NON SWITCHED[J
PROTOCOL: SDLC - NRZI
=
YES
TRANSMISSION MODE: DUPLEX
CABLE ID: DIRECT ATTACHMENT
II
CLOCK: MODEM
===>
F1:END F2:MENU2 F3:ALARM F5:REFRESH F6:LlNE PARAMETERS F7:LEADS
10
According to the information displayed in
13,
m
and
II,
go to the appropriate
page.
m
II II
1er..!·IMlUI
CCITT V.35 Nonswitched
Modem attachment
10-4
CCITT V.35 Nonswitched Direct attachment
10-6
CCITT X.21 Nonswitched Modem attachment 10-8
CCITT X.21 Nonswitched Direct attachment 10-10
INTF STANDARD
NOT ACCESSED Nonswitched CABLE ID NOT ACCESSED See below
If INTF STANDARD NOT ACCESSED is displayed in
II
and CABLE 10 NOT
ACCESSED -in
II:
The line is not activated. More information on the interface is
given in the 3745 Advanced Operations Guide under the Line -Interface Display
function.
Chapter 10. Line Problem (HSS)
10-3