IBM 3745 Problem Determination Manual page 123

Alerts
3745 Alert Reference Code 60
Alert Condition: The line adapter microcode has detected a protocol error in the high-level exchange
of commands with the control program, thus causing the line adapter to be disconnected from the
control program. A line adapter dump can be taken by MOSS for problem investigation, if necessary.
Then, the MOSS will re-IML the line adapter.
MOSS Console Alarm Message - - - - - - - - - - - - - - - - - - - - - - - - - - ,
ALARM 60 : LA nn (LINES xxxx-yyyy) RE-IML IN PROGRESS
NetView* Alert - Dynamic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ,
Communicati.on Protocol Error: Line Adapter
Subvector and Code Causes and Actions
Subfield Keys Points
Alert
ID
Number X' F9DC070E '
SV X'92'
Alert Type X'01' Permanent
SV X'92'
Alert Description X'3000' Communication Protocol Error
SV X'92'
Probable Causes X'3309' Line Adapter
SV X'93'
X'1021' Communication Controller Control Program
User Causes
(none)
SV X'94' SF X'01'
Install Causes
(none)
SV X'95' SF X'01'
Failure Causes
X'1021' Communication Controller Control Program
SV X'96' SF X'01'
X'33C2' .Line Adapter Microcode
X'82'
SF
(Line Adapter Number (x'S3'))
X'82'
SF
(Line Address Range (x'53'))
Actions
X'3400' Wait for additional message before taking action
SV X'96' SF X'81'
X'3302' If problem continues to occur repeatedly
then do the following
X'3000'
Contact Appropriate Service Representative
X'32CO' Report the following:
X'82'
SF
(Reference Code (x'30'))
X'82'
SF
(Product Alert Reference Code (x'FO'))
1-106
IBM 3745 Communication Controller: Problem Determination Guid~
o
o