IBM 3745 Problem Determination Manual page 307

Line "-Problem (HSS)
CCITT V.35 Nonswitched - Modem Attachment
11
~
To display the Control Lead screen.
12 §]
To start the' refresh.
If you wish to stop the refresh:
~"
[ __ 1 __
~
___
L_oc_a_t_e_D_T_R_a_n_"d __ D_S_R_o_n_t_h_e_s_c_re_e_n_. __________________________________
J
14
Ask the host operator to reactivate the line.
15
The status of
OTR
and
OSR
should be updated when the Itne is reactivated. Note
each status and perform the action requested on the following page.
--------------------------------------------------------------------------------~
mm/dd/yy
hh: mm
FUNCTION ON SCREEN: LINE INTERF DSPLY "
- ENTER A DECIMAL LINE ADDRESS FROM 0 TO 1039
= =
>
LINE 1028 0 IN SCANNER 3 CCITT V35
===>
XHIT eHD: SOLe XHIT DATA
STATUS: IN-PROGRESS
HODEM-OIjTB ON
RTS ON
Rev CHD: SOle Rev DATA
STATUS: IN-PROGRESS
MODEM-I N " ON
RFS ON
CD
F1:END F2:MENU2 F3:ALARM F5:REFRESH F6:L1NE PARAMETERS F7:LEADS
10-4
IBM 3745 Communication Controller: Problem Determination Guide
o