IBM 3745 Problem Determination Manual page 342

o
o
()
o
13
Press Power On Reset once.
14
• If 8 does not blink in the
Function display go to next
step.
• If 8 blinks in the Function
display, press Exit and
CO
Press Power Off Once.
• If control panel displays and
indicators are completely
blank, go to next step.
• If control panel displays and
indicators are not completely
blank, press Exit and
CO
15
Press Exit once.
• If Power Control and Service
Mode displays are set as
before the test: The test is
successfu lIy completed, and
no errors have been detected.
The control panel-returns to
normal operational mode.
• If Power Control and Service
Mode displays are not set as
before the test, press Exit and
CO
Control Panel Problems
[
IL~
I
MOSS Inop
I
Service Mode
All CAs Disabled
Power Control·
Console in Use
Service Mode
Power Control
Chapter 15. Control Panel Problems
15-5