IBM 3745 Problem Determination Manual page 242

o
o
o
o
o
Looking at the remote
MOSS console:
If .
V
Following a load from host, the control
program initialization fails with an abend
code of X7000'.
Use the MOSS ELD fu nction to display
the alarms and to check the abend
codes.
The abend code is displayed in the MSA
field of the MOSS screen but may be
displayed for a short period of time and
not being noticed.
The loading or activation of the control
program fails while you are performing
a remote loading/activation procedure.
Do
Check the value of the NCP USGTIER
keyword which may have been wrongly
set at NCP generation time for this 3745.
See "Usage Tier Problems" on
page 2-3.
If the usage tier was correctly defined
then
ra
Refer to:
• "Remote Loading/Activation
Overview" on page 8-10.
• " Remote Loading/Activation
Problems and Messages" on
page 8-11.
• 3720/3745 Remote
Loading/ Activation Guide SA33-0161
for detailed information.
Chapter 8. IPL Problems (From Host or Disk)
8-7