IBM 3745 Problem Determination Manual page 291

13
If the message NO ERROR FOUND is displayed, press EXIT. Then, go to step 15.
Otherwise go to step 14.
14
Perform the action corresponding to the message displayed.
If a wrap plug is connected, the message REMOVE TEL WRAP THEN PRESS EXIT is
displayed. Perform this action.
15
If a wrap plug is connected, the message REMOVE TEL WRAP THEN PRESS EXIT is
displayed. Perform this action.
At this point, you have performed the LLAP.
For the first time, return to step 10 and perform the LLAP a second time.
For the second time, the test is completed.
If the problem persists when operation is resu med, ask the host operator to
check the line and the control program.
9-40
IBM 3745 Communication Controller: Problem Determination Guide
o
V
/~.
!
'~_j
o