Table of Contents
Advertisement
SAM BOOST™ WITH SMART NOZZLE N
6.4
CHECKING BATTERY CHARGE LEVEL & WI-FI STRENGTH
Follow the steps below to check the nozzle battery life and signal strength:
1. Hit the arrow button on the bottom right of the splash screen and go into the home page
a. If in pump mode, then user will skip step 1.
2. Select Valve 1 or Valve 2 info button the top left of the home page to check Nozzle 1 or Nozzle 2
Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
The SAM™ SMART NOZZLE information can only be displayed when the nozzle is
awake. Press any of the two function buttons located on either side of the SAM™
SMART NOZZLE module until the LED display illuminates to wake up the nozzle.
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 48 of 66
Advertisement
Table of Contents
