Idex Akron Bras SAM BOOST Operation Installation Maintenance Manual page 22

For sam boost with smart nozzle n2p and uv780 display
Table of Contents

Advertisement

SAM BOOST™ WITH SMART NOZZLE N
See the drawing below for the overall antenna size and mounting hole dimensions
Route the antenna wire
The coaxial cable cannot be shortened or lengthened with extensions.
Any excess length should be looped or coiled back and never folded to prevent damage to
the cable.
When running the coaxial cable, use grommets when passing through walls, avoid sharp 90°
bends of the cable, and use clips or wire-ties to secure the cable down.
Connect the coaxial cable to the radio module
When connecting the coaxial cable to the radio module, do not overtighten beyond 8 – 8.5
IN-LBS. Doing so may risk damaging the connection port shown in the next image.
Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 21 of 66

Advertisement

Table of Contents
loading

Table of Contents