SAM BOOST™ WITH SMART NOZZLE N
The SAM BOOST™ system also includes a set of harnesses that connect nodes to the distribution modules.
5. INSTALLATION
A successful SAM BOOST
ensure compatibility. Note the following compatible engine/truck configurations:
•
2015 or newer Cummins CAN controlled Engine (500k Baud Rate)
•
2012 or newer with Cummins CAN controlled Engine (250k Baud Rate)
•
2001 or newer with Analog controlled Engine with J1939 engine data
•
2019-2022 Ford OBDII (F550-650)
•
It is not an Aerial Apparatus
•
Apparatus has Class1 TPG+ or FRC InControl series Pump Pressure Governor
•
Apparatus is not utilizing FRC Datalink Network with the existing FRC governor
It is recommended to plan the physical installation of the SAM Boost™ System by laying out all components
included in the kit on the pump per the System Layout Drawing (FSG-PL-01530) and verify harnesses are
within reach.
Items to consider before installation:
□
Find optimal location of CAN Distribution hubs as harnesses only extend 39" from hub.
□
Find optimal location for antenna within 8' of wire to Radio Module
□
Verify harnesses are within reach of components
Do not extend provided harnesses without contacting technical support.
Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
™
application starts with identifying the engine control type so to
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 17 of 66