Table of Contents
Advertisement
Since the SAM™ SMART NOZZLE is paired to a single discharge valve the Akron nozzle color kit should be
used to match discharge color. This will help make sure the nozzle and its paired discharge are readily
identified
The screen on the truck can show the pressure at the nozzle in addition to friction loss, signal strength, and
battery condition. This information is available for each SAM™ SMART NOZZLE being used on the truck
mounted display screen.
Max Pressure
Max Distance
Operation Battery Life
Rated Tip Pressure
Nozzle Type
Pistol Grip
LED Display
Function Buttons
(one each side)
Customer Specified
Nozzle inlet
Sheet: FSG-MNL-00234
SAM BOOST™ WITH SMART NOZZLE N
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
The SAM™ SMART NOZZLE is paired to a single discharge valve. Do not place the
nozzle on a different discharge valve. Doing so can result in the wrong discharge
valve opening, which may cause bodily injury.
SAM SMART NOZZLE SPECIFICATIONS
Inlet size
Color Kit
* Max distance can be reduced by environmental conditions
Battery Compartment
PHONE: (800) 288.1161
www.akronbrass.com
300ft of preconnected hose*
50, 75, or 100 (customer specified)
Akron Turbojet™, Assault™, and Pyrolite shutoffs
with smoothbore nozzles
Red, orange, yellow, blue, green, white, and black.
Serial Number Location
SAM™ Module with Nozzle
Revision 2023-08-28
P AND UV780 DISPLAY
2
230 PSI
Up to 8 hours
1.5 inch
Pistol grip is optional
Customer Specified
Akron Brass Company
Handline Nozzle
Page: 11 of 66
Advertisement
Table of Contents
