Table of Contents
Advertisement
SAM BOOST™ WITH SMART NOZZLE N
P AND UV780 DISPLAY
2
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
Master discharge/intake pressure transducers arrive from the factory calibrated. Only
use pressure transducers that have been provided.
The tank level transducer is not calibrated. User must calibrate tank level.
The matrix governor can operate the engine in either RPM or PSI control modes. In RPM mode, the matrix
will maintain the engine speed at the user specified RPM. In PSI mode, the matrix will increase or decrease
the engine speed to maintain user specified pump pressure. The matrix governor can support different engine
control styles and can operate at 125K, 250K, or 500K baud rate.
4.8
CAN DISTRIBUTION MODULE AND WIRING HARNESS OVERVIEW
The SAM BOOST™ system provides two CAN distribution modules. These modules distribute power and
CAN communication to nodes on the SAM BOOST™ system.
PHONE: (800) 288.1161
www.akronbrass.com
Sheet: FSG-MNL-00234
Revision 2023-08-28
Page: 16 of 66
Advertisement
Table of Contents
