Batteries And Charger Overview; Display Overview - Idex Akron Bras SAM BOOST Operation Installation Maintenance Manual

For sam boost with smart nozzle n2p and uv780 display
Table of Contents

Advertisement

SAM BOOST™ WITH SMART NOZZLE N
4.2

BATTERIES AND CHARGER OVERVIEW

The SAM™ SMART NOZZLE comes with Lithium-ion rechargeable batteries. These batteries must be fully
charged prior to first use and will last approximately 8 hours during pumping operations. Use only the battery
charger supplied.
The user must tap a function button on the nozzle to wake it up. Once the pump is engaged, the nozzle will
stay awake. The nozzle will automatically turn off when the pump is disengaged. If the user taps a button
while the pump is disengaged, the nozzle will fall asleep after one minute.
4.3

DISPLAY OVERVIEW

Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
Read and follow all battery safety instructions located inside battery and charger
packaging
Using any battery or battery charger other than the ones supplied can hamper
performance or potentially damage your SAM™ SMART NOZZLE or batteries.
Failure to use the specified equipment increases the chance of fire and will void your
warranty.
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 12 of 66

Advertisement

Table of Contents
loading

Table of Contents