Table of Contents
Advertisement
SAM BOOST™ WITH SMART NOZZLE N
The SAM BOOST™ system comes with a display that will replace an existing governor on a truck. The SAM
BOOST™ display allows for the following:
•
Discharge valves status
•
Discharge valves control
•
Tank-to-pump control
•
Tank-to-pump status
•
Engine Information and control.
•
SAM™ SMART NOZZLE Status
•
SAM BOOST™ System Status
The SAM BOOST™ display has an integrated backlight and polarized screen to allow for better screen
visibility in harsh environments.
4.4
DISCHARGE VALVE OVERVIEW
The SAM BOOST™ system comes with two SAM™ SMART NOZZLE enabled discharge valves. These
valves have electric actuators and are controlled by the SAM BOOST™ display. The valves have integrated
pressure transducers to read individual line pressure. The valves have 3 modes: SAM™ SMART NOZZLE
mode, SAM mode, and manual mode.
SAM™ SMART NOZZLE Mode
The valve will automatically adjust (in conjunction with governor) to maintain desired nozzle pressure.
The valve is in this mode when there is a nozzle icon on the associated valve set pressure.
SAM Mode
The valve will automatically adjust (in conjunction with governor) to maintain desired line pressure.
The valve is in this mode when a set pressure appears on the associated valve.
Manual Mode
The valve will adjust to user desired valve position. The valve is in this mode when there is an orange
"MANUAL MODE" bar below the associated valve.
Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
Typical display shown
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 13 of 66
Advertisement
Table of Contents
