Table of Contents
Advertisement
SAM BOOST™ WITH SMART NOZZLE N
1. The valve position calibration page will automatically run ALL the valves through a position
calibration when hitting the top right start button.
2. When "PASS" appears, this indicates a successful calibration.
a.
If position calibration failure, verify truck has proper voltage.
3. A power cycle is required after running
7.6
Valve Pressure Calibration Page (Password 08267)
NOTE: Valves arrive calibrated from factory. Calibration may be required annually.
Sheet: FSG-MNL-00234
INSTALLATION, OPERATING, & MAINTENANCE MANUAL
PHONE: (800) 288.1161
www.akronbrass.com
Revision 2023-08-28
P AND UV780 DISPLAY
2
Page: 54 of 66
Advertisement
Table of Contents
