Fault; Troubleshooting; 3319950_Ut_Gb_Rev.3 - Angelo Po 0N0BM1E User Manual

FAULT

The appliance has been tested before being
put into service. The information provided be-
low is intended to assist in the identifi cation
and correction of any anomalies and malfun-
ctions which might occur during use.
The user can solve some of these problems
himself, but for others specifi c technical knowl-
edge or skill is required, and so they must only
be carried out by qualifi ed staff with recog-
nised experience acquired in the specifi c sector
of operation.
Faults
The heating elements do
not come on.

3319950_ut_GB_rev.3

FAULT

TROUBLESHOOTING

For any need, please contact Angelo Po's
agents or headquarters, which can be
found in the contacts section of the website
www.angelopo.com.
Causes
Electrical connection not
made correctly.
Safety thermostat tripped.
Switch faulty.
NOTE:
Remedies
Check the connection of the
electrical wires.
NOTE: Contact the af-
ter-sales service.
Wait the safety thermostat's auto-
resetting.
Replace the switch.
NOTE: Contact the af-
ter-sales service.
ENGLISH
21