Angelo Po 0N0BM1E User Manual page 34

ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
10
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and
on the adjacent metal
accessories
Countermeasures
• Prevent the appliance from
being powered acciden-
tally.
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are secure-
ly fi xed
• Before commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
3319950_ut_GB_rev.3