Hazards And Safety Provisions During Appliance; Decommissioning - Angelo Po 0N0BM1E User Manual

SAFETY
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for
the countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads
Where or in which situations
Hazard
does the hazard occur?
Risk of in- When the appliance moves
jury due to body
overload
► Source of hazard: Risk generated by materials/substances
Hazard
C o n c e n t r a t i o n
of unburned gas
emissions due to an
incorrect appliance

decommissioning

3319950_ut_GB_rev.3
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
During appliance de-
commissioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
• Use a suitable lifting
device
• Observe the limit values
for lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
ENGLISH
Safety device
• Protection
panels
• System
switch-dis-
connector
Safety device
• Protective
gloves
• Protective shoes
• Safety helmet (e.g.
for suspended
loads, overhead
operations...)
Safety device
None
11