Safety Devices; Safety And Information Signs - Angelo Po 0N0BM1E User Manual

ENGLISH
Although the appliance is complete with all
safety devices, during installation and connec-
tion additional devices must be added if neces-
sary to comply with the relevant legal require-
ments.
The illustration shows the position of the de-
vices.
Automatic resetting Thermostat: cuts off
A)
the electricity supply in case of overheat-
ing. Once the cause has been eliminated and
temperature is reduced, operation is restored
automatically.
WARNING: There are no indicator de-
vices to signal the tripping of the automatic
reset thermostat.
The illustration shows the position of the si-
gns provided.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
WARNING:: watch out for hot sur-
F)
faces.
4

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

A
E
D
F
37M3202
C B
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WEEE Symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
G
A
H
3319950_ut_GB_rev.3