Fault; Troubleshooting - Angelo Po 1N1BR2E User Manual

ENGLISH
The appliance has been tested before being
put into service.The information provided be-
low is intended to assist in the identifi cation
and correction of any anomalies and malfun-
ctions which might occur during use.
The user can solve some of these problems
himself, but for others specifi c technical
knowledge or skill is required, and so they must
only be carried out by qualifi ed staff with reco-
gnised experience acquired in the specifi c sec-
tor of operation.
Faults
No water delivered
The heating elements
do not come on
22

FAULT

TROUBLESHOOTING

Causes
Filler solenoid valve faulty
Filling switch malfunction
Well raised or not resting on
fi xed part of appliance
Electrical connection not
made correctly
Safety thermostat tripped
Switch faulty
NOTE:
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website www.
angelopo.com.
Check the pressure switch
NOTE: Contact the after-
sales service
Check the water connection.
NOTE: Contact the after-
sales service
Check that the well is not raised or
not resting fi rmly on fi xed part of
Check the connection of the electri-
Carry out the appliance reset
Replace the switch
FAULT
Remedies
connection.
appliance
cal wires
3301331_ut_GB_rev.1