Hazards And Safety Provisions During Servicing - Angelo Po 0N0BM1E User Manual

SAFETY

HAZARDS AND SAFETY PROVISIONS DURING SERVICING

During servicing, watch out for the following hazards and provide for the countermeasures
indicated below:
► Source of hazard: Appliance mechanics
Hazard
Risk of cutting
due to sharp
edges
► Source of hazard: Risks associated with the environment in which the appliance is used
Hazard
Presence of satu-
rated steam
NOTE: Only applies to electrical appliances.
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
3319950_ut_GB_rev.3
Where or in which situations
does the hazard occur?
When handling sheet-
metal parts
Where or in which situations
does the hazard occur?
Condensation and drip-
ping on electrical parts
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance's electrical sys-
tem, to be carried out only
by expert technicians of
an authorised customer
service
Countermeasures
• Operations to the electric
system may be carried out
by authorised and quali-
fi ed staff only, in accor-
dance with the relevant
applicable laws.
• Specialist procedure
• Comply with the correct
installation requirements
as per section "Installing
the appliance" of the in-
stallation manual.
• Disable the power supply
before removing the pro-
tections
ENGLISH
Safety device
None
Safety device
None
Safety device
• Protection
panels
• System
switch-dis-
connector
9