ENGLISH
The appliance has been tested before being
put into service. The information provided be-
low is intended to assist in the identification
and correction of any anomalies and malfunc-
tions which might occur during use.
The user can solve some of these problems
himself, but for others specific technical knowl-
edge or skill is required, and so they must only
be carried out by qualified staff with recog-
nised experience acquired in the specific sector
of operation.
Faults
The heating elements do not
come on
22
FAULT
TROUBLESHOOTING
NOTE:
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website www .
angelopo .com .
Causes
Electrical connection not
made correctly
Safety thermostat tripped
Switch faulty
Remedies
Check the connection of the
electrical wires
Carry out the appliance reset.
Replace the switch.
NOTE: Contact the
after-sales service .
3320040_ut_GB_rev.3
FAULT