Switches Between Left-Hand And Right-Hand Throttles; Right-Hand Throttle Switched To Left-Hand Throttle - devention DEVO 7E User Manual

7-channel micro computer system
Table of Contents

Advertisement

Left non-
slipping block
left lateral non
slipping block
Right throttle set
Left throttle s
Throttle Control
Spring
—Screw G
Screw F
Linkage Fixed Screw Screw F
i
r
1)
.
to '
Screw G Linkage Fixed Screw
Welcome to use the DEVO 7E transmitter
cleention
DEVO 7E
8.0 Switching between left-hand and right-hand throttles
Switching between left and right-handed throttle modes requires both a MECHANICAL and ELCTRONIC switch.
It will work correctly only after both parts are completed. Please follow the steps below :
8.1 Right-hand throttle switched to left-hand throttle
(1) MECHANICAL step
Remove the left lateral and right lateral non-slipping blocks and the left and right non-slipping blocks on
the base plate, respectively.
I
Remove the fixed screws A, B, C, D, and E, and then remove the base plate.
Remove the 6 screws and rear cover to expose the base plate. The photo below shows the internal views of
right and left hand throttle setups. Using a cross-head screwdriver loosen and remove, in order, the Linkage
Fixed Screw, Screw F, Screw G and the Throttle Control Spring from the right throttle set, remount the parts
removed into the left throttle set in the corresponding (rotated) positions shown below. Adjust the tension
using Screw F to match your preferred setting. Replace the rear cover.
(2) The ELECTRONIC Step
From the Main Front Panel, press "ENT" button, in the LCD screen, "System" will start to flash. Press the
"ENT" button again to enter the System Menu. Use the UP and DN buttons until flashing "STMOD" appears,
press "ENT" to enter Stick Mode Selection Menu. Use UP or DN buttons until flashing "MODE 2" or "MODE
4" appears. Press "ENT" to confirm and "EXT" button to return to operation mode.
All saved model date will automatically be switched to be compatible with Mode 2 or Mode 4.
k.
o d e
El]
i k. Mode
Mode 1
NA 0 d e
tvl o d e
o d e
'
NA Cl d
e
o e 2
-
:3
e
4
A) r4R)
Once both the MECHANICAL and ELECTRONIC steps are successfully completed the transmitter is now
ready for normal operation.
DEVO 7E —7

Advertisement

Table of Contents
loading

Table of Contents