devention DEVO 7E User Manual page 59

7-channel micro computer system
Table of Contents

Advertisement

Throttle Curve
P
Dint
73
1.7.drit
- 1
Status
Active
(4.2) Status setting
I.. 21113
Throttle Curiyie
Throttle Stick.
!3 • 0
Inhibit
3i.hitch
Pos
ri
.
ol
:9
Switch
(75)Flight mode n
IT)
Flight r'y'l
0
le
N
r
; 7 - 1 . 1
EMI.]
cleUention
DEVO 7E
Welcome to use the DEVO 7E transmitter
(4.3) Output setting
An expansion list of Output items will be shown after activating the Status. Press
UP
or
DN
to move navigation
mark to select Output item. And press
R
or L to increase or decrease the amount of selected point with a
minimum of 0.0% and a maximum of 100.0%. The curve graph in right will be change accordingly.
Throttle Curie
Status
0.0 0.0
6,5% /
LIW134H
.
J
11
Ad 1 V e
0 UtP Lit
1
(4.3) Output setting
(4.4) Throttle setting
The switch between Pos 0 and Pos 1 can be freely realized through throttle stick after the below amount
has been set up. The below set amount is the position of throttle stick as well as the switch point.
R
C.:
Throttle Stick n
Inhibit
Siyvitch
Pos 0
Throttle setting: Press UP or DN to select Throttle seting,
Press L to decrease the amount with a lower limit of 0.0%
or Inhibit, Press R to increase the amount with an upper
limit of 100.0%.
(4.5) Switch Selection
When the item Throttle Stick is set in Inhibit, it is possible to switch between Pos 0 and Pos 1 by Switch.
Press UP or DN to select "Switch" . Press ENT to enter into Switch selection interface, press UP or DN to
choose desired item. Press ENT, the desired item whose left side will be changed into "1 " from "0". If two or
more items are selected, the item should be chosen, whose left side should be changed into "1 " from "0".
Press EXT after finished it.
3.7 Differential
If want to use this function, Flaperon or Delta should be previously selected in Wing Type of Model Menu.
Refer to "2.11 Wing Type".
(1) Aileron differential setting
Press ENT to enter into Main menu; press UP or DN to choose Function menu. Press ENT to enter into
Function menu; press UP or DN to choose Differential, press ENT to enter interface of Differential, illustration
as below.
Differential
Channel
F' o s 0
Mounting servos in left and right ailerons are a must if
using this function. The following interface will be shown
after Flaperon or DELTA selected in Wing Type. Refer
to "2.11 Wing Type".
Aileron
DEVO 7E - 56

Advertisement

Table of Contents
loading

Table of Contents