Installation Requirement For Devo 7E Battery Pack; Devo 7E Battery Charging - devention DEVO 7E User Manual

7-channel micro computer system
Table of Contents

Advertisement

CHG Charging Socket
cleUention
DEVO 7E
Welcome to use the DEVO 7E transmitter
12.0 Installation requirement for DEVO 7E battery pack
Open the battery cover of DEVO 7E transmitter and take
out the battery box. Insert 4 new cells AA batteries either
Alkaline or full charged NIMH battery into the battery box.
Please double check the polarities are correct and do not
mix old and new batteries.
WARNING:
(1) Inserting the batteries with the incorrect polarity can cause damage to the transmitter and/or batteries.
(2) Do not put the polarities of batteries in the opposite directions.
(3) Fool-proofing must insert correspondingly when battery pack connect to radio, see below:
r
Anode of the battery Cathode of the battery
Cathode of the battery Anode of the battery
Power fool-proof plug Battery box fool-proof plug
12.1 DEVO 7E Battery Charging
WARNING: The CHG socket is only suitable for use with NiMH batteries. If using alkaline batteries or a LiPO
pack, it is forbidden and dangerous to use the CHG socket.
Charge socket(CHG):input DC at 8-12V,200mA; Polarity: C1—.)—e
DEVO 7E — 12

Advertisement

Table of Contents
loading

Table of Contents