Table of Contents
Advertisement
Aileron to Rudder._
Throttle Stick
inhibit
Fos 0
1:T5)FI
i9
ht Mode 0
ii iFIiqht Mode 1
0.1 F I a. p N o rm
Elev;=1.tor to Flap
Pos 0 Up
OCV
,e
O
F'os 0 0n
W
n
0%
Syyitch
(T)
Fl
i 9
ht
o d e 0
ICJ
Fli9ht
le
(75.1
F
I
8.
ri NI
0
rm
E1.1
Welcome to use the DEVO 7E transmitter
cleUention
DEVO 7E
(3) Pos 1 setup, the setup is same as above.
(4) Throttle stick setup
The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick. Press UP or
DN of Throttle Stick to set the position amount of throttle stick. The default setting is Inhibit. The adjustable
range is 0.0-100.0%.
(5) Switch setup
The switch will display the current switch position. press UP or DN to select the desired item press ENT to
the setting interface and "0" before the item will be changed into "1". If two or more items are selected, the
item And should be selected. Press EXT to exit after finished.
3.12 Elevator to flap mix
This function is used to execute the mix of elevator to flap.
Press ENT enter to main menu, press UP or DN to select function menu. Press ENT to enter to function menu.
Press UP or DN to select Elevator to flap mix, press ENT to enter to Elevator to flap mix setting interface.
(1) Pos 0 UP setup
Press UP or DN to move the navigational mark to select
item Pos 0 UP, press R or L upward mix value of Elevator
to flap mix will be changed. The mix direction will be
revised by changing the sign of plus or minus before the
value. The adjustable range is ±125%.
(2) Pos 0 Down setup
Press UP or DN to move the navigational mark to select item Pos 0 Down, press R or L downward mix value
of Elevator to flap mix will be changed. The mix direction will be revised by changing the sign of plus or minus
before the value. The adjustable range is ±125%.
(3) Pos 1 setup, the setup is same as above.
(4) Throttle stick setup
The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick. Press UP or
DN of Throttle Stick to set the position amount of throttle stick. The default setting is Inhibit. The adjustable
range is 0.0-100.0%.
(5) Switch setup
The switch will display the current switch position. Press UP or DN to select the desired item, press ENT to
the setting interface and "0" before the item will be changed into "1". If two or more items are selected, the
item And should be selected. Press EXT to exit after finished.
Elevator to Flap ...
Throttle Stick.
Inhibit
Syyttch
1 . 0 1 .
Pos 0
DEVO 7E —
61
Advertisement
Table of Contents
