Table of Contents
Advertisement
Differential
F'os 0
F'os 1
- 0
H U0
Welcome to use the DEVO 7E transmitter
deUention
DEVO 7E
(1.1) Channel
Current setting channel is Aileron. System default can not be set.
(1.2) Setting for Pos 0
Press UP or DN to choose Pos 0, press R or L to increase or decrease differential value, respectively. The
adjustable range is ± 100%.
(1.3) Setting for Pos 1
Press UP or DN to choose Pos1, press R or L to increase or decrease differential value, respectively. The
adjustable range is ± 100%.
Differential
C h ;71.nn el
Aileron
Pos 0
.
1
;11.111
(1.2) Setting for Pos 0
(1.3) Setting for Pos 1
(1.4) Switch selection
It is possible to switch by Setting Switch when differential is in use.
Press UP or DN to choose Switch, press ENT to enter interface of Switch selection, press UP or DN to choose
desired item. Press ENT, the desired item whose left side will be changed into "1" from "0". If two or more
items are selected, the item should be chosen, whose left side should be changed into "1" from "0". Press
EXT after finished it.
Differentia.1
F' o s
Svyiitch
135)Flight Nelode
iTAFI p
o r
8.1
(75:1F g ht Mode 0
iyv Ito I-1
P
ip
s 0
(2) Rudder differential setting
V-Tail should be previously set in Wing Type of Model Menu if the rudder differential function is activated.
Refer to "2.11 Wing Type". And then the following interface will be shown:
DlfferentiEd
Channel
(2.1) Setting for Pos 0
Press UP or DN to choose Pos 0, press R or L to increase
or decrease differential value, respectively. The adjustable
range is ± 100%.
Rudder
Fos 0
(2.2) Setting for Pos 1
Press UP or DN to choose Pos1, press R or L to increase or decrease differential value, respectively. The
adjustable range is ± 100%.
(2.3) Switch selection
It is possible to switch by Setting Switch when differential is in use.
Press UP or DN to choose Switch, press ENT to enter interface of Switch selection, press UP or DN to choose
desired item. Press ENT, the desired item whose left side will be changed into "1" from "0". If two or more
items are selected, the item And should be chosen, whose left sice should be changed into "1" from "0". Press
EXT after finished it.
DEVO 7E-57
Advertisement
Table of Contents
