Table of Contents
Advertisement
Aileron to Flap Mix 1E1
Throttle Stick.
Inhibit
itl h
111111111=11111
iyvitc h
Program Mix
Program Mix 1
Inhibit
No rill &.*1.1
C urve
Elevator
ti aster
veElevator
Aileron
Throttle
Rudder
cleention
DEVO 7E
Welcome to use the DEVO 7E transmitter
(5) Throttle stick Setup
The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick. Press UP or
DN to make navigation mark select "throttle stick setting", press R or L to change the value or inhabit. Change
value can set throttle stick postion. The default setting is "inhabit". The adjustable range is from 0.0% to 100.0%
(6) Switch Setup
Press UP or DN to make navigation mark select "switch" setting, press ENT to enter into usable switch interface,
press UP or DN to make navigation mark select desired switch setting.Press ENT to confirm,make left sign
from "0" to "1". If two or more items are selectable,the item And should be selected, to make left sign from
"0" to "1", Press EXT to exit after finished.
1:75)F1 i 9 ht Mode 11
IT) F I i 91 -it
o d e 1
(75) F
3. NI
rm
al
3.16 Program mix
There are total eight sets of Program Mix, It is possible to freely set th channels and amounts which you
want to select and amend,respectively.
Setting method:
press "ENT" enter to "main menu"; press UP or DN to make
navigation mark select "function menu", press "ENT" to enter
into "function menu"; press UP or DN to select "program
mix", press"ENT" enter into"program mix", shown "program
mix 1" and settable status(the factory default setting is
Inhibit). Take program Mix 1 as an example.
(1) Setting method for Normal in Program Mix.
Press UP or DN to make the navigation mark choose "Normal" item,and press ENT then expands up an
enquery "All Servos Hold?".Choose "OK" for all the servos will be locked at the current statuses;choose
"Cancel" for unlocked. Enter the next interface after choosing.
EL!
I a VI:l
(1.1) Master Channel Setup
Press UP or DN to make the navigation mark choose "Master Channel" item, and press ENT to enter the
Master Channel setting interface.Press UP or DN to choose the desired channel, then press ENT to confirm
the mark "J" before choosed channel name, press ENT to return the Program Mix 1 interface.
(1.2) Slave Channel Setup
Press UP or DN to make the navigation mark choose "Slave Channel " item, and press ENT to enter the Slave
Channel setting interface.Press UP or DN to choose the desired channel, and press ENT to confirm the mark
"4" before the Slave Channel, and "EXT" to return Program Mix 1 interface.
Program I'v1ix 1
Al I :72 . 171 re' os Hold '?
II
K
p
EI
Program Mix 1
Master
Slave
uai
Aileron
I
Throttle
Rudder
(1.1) Master Channel Setup
(1.2) Slave Channel Setup
DEVO 7E -
64
Advertisement
Table of Contents
