devention DEVO 7E User Manual page 49

7-channel micro computer system
Table of Contents

Advertisement

Stick Position Svyi„,
Position
0%
On
up
Stir k. Positio
EDI
Position
0 n
Up
cleUention
DEVO 7E
Welcome to use the DEVO 7E transmitter
Press UP or DN to inhibit channel in navigation mark, and press R to expand the menu.The channel includes
four items: Elevator, Aileron, Throttle and Rudder. The factory default is Inhibit. Take Elevator for example.
Press R or L to choose the Elevator as stick, then Press DN to move nagivation mark to value of position.
It's possible to adjust the stick position via pressing R or L.
Stir k. Position
1
E1
siviyiitch
Channel
. .............
Press DN to navigate the OPEN setting, press R or L to change the direction of the channel stick.
Press UP or DN to navigate the STATUS, which can check the sketch map of the stick OPEN/CLOSE direction.
Check if it was set correctly.
-
1
Sticl.:' Position 3i-id
After finished the setting, press EXT to exit.
2.9 Device select
This setting can help you configure various functional switches. It includes Flight Mode switch, Flight Mode
trim, Throttle hold Switch and Flap Switch select.
Press ENT to enter Main Menu, press UP or DN to move navigation mark to select Model menu. Press ENT
to enter Model menu function. Press UP or DN to select Device Option. Press ENT to Device Option interface.
De'y'ire F-lelect
Flight Switch
(1) Flight Mode Switch
Press UP or DN to move navigation mark to Flight Mode
Switch and press R or L to select the desired switch, there
are both FMOD SW, HOLD SW and Inhibit. The factory
default setting is Inhibit.
Inhibit
Flight Mode Trim
Com
in
on
(2) Flight Mode Trim
There are two option modes: Common and Flight Mode. In Common Mode, all the trim values settings are
applied the same to each Flight Mode. In Flight Mode, the trim value can be set and remembered differently
for each of the 3 available Flight Modes. The default is common.
Setup:
Press UP or DN to choose the Stunt trim select, press R or L to select "Common"or Flight Mode, the factory
default setting is Common.
(3) Throttle Hold Switch
Refer to (1) Flight Mode Switch.
(4) Flap Switch Select
Refer to (1) Flight Mode Switch.
After finished the setting, press EXT to exit.
DEVO 7E-46

Advertisement

Table of Contents
loading

Table of Contents