Table of Contents
Advertisement
IT: Flight Mode 0
IT)Flight Mode 1
1:15:IF
N r mal
Differential
Channel
Flap
Siyvitch
And
IT:Flight N./lode u
1:15)Flight l'yloda
r.1.1Flari Normal
C
C:
h
n
B
Aileron
lr
Elalance
Po i Fit .:::: A
0%
cleention
DEVO 7E
Welcome to use the DEVO 7E transmitter
Differential
Pos 1
PO,; 0
(3) Flap differential setting
It should be previously set the flap dual channel function in Wing Type of Model Menu (refer to "2.11 Wing
Type") in order to activate the menu of Flap Differential.
(3.1) Setting for Pos 0
Press UP or DN to choose Pos 0, press R or L to increase
or decrease differential value, respectively. The adjustable
range is ± 100%.
(3.2) Setting for Pos 1
Press UP or DN to choose Pos1, press R or L to increase
or decrease differential value, respectively. The adjustable
range is ± 100%.
(3.3) Switch selection
It is possible to switch by Setting Switch when differential is in use.
Press UP or DN to choose Switch, press ENT to enter interface of Switch selection, press UP or DN to choose
desired item. Press ENT, the desired item whose left side will be changed into "1" from "0". If two or more
items are selected, the item should be chosen, whose left side should be changed into "1" from "0". Press
EXT after finished it.
Differential
Pos 1
vyiitch
Pos U
3.8 Balance
This function can adjust the parameters of the two servos which are used in the dual channels. It should be
previously activated one of these wing types of Flaperon, Delta, and V Tail in Wing Type at Model Menu.
Refer to "2.11 Wing Type".
Setting method:
Press ENT to enter into Main Menu, press UP or DN to
choose Function. Press ENT to enter into Function menu,
press UP or DN to choose Balance. Press ENT to enter
interface of Balance setting, picture as right:
(1) Channel: current setting channel is Aileron. System default can not be set.
(2) Point parameter adjustment
Point< Right Setting: Press UP or DN to choose "Point<
Right". If need to adjust the value, press L (0% means no
adjusting). A minus value means the amending direction is
downward; press R to adjust value(0% means no adjusting).
A plus value means the amending direction is upward. The
adjustable range is ± 100%.
DEVO 7E -
58
Advertisement
Table of Contents
