Table of Contents
Advertisement
Welcome to use the DEVO 7E transmitter
de(kntion
DEVO 7E
3.10 Swash Mix
This function, which can be executed through flight mode, is used for amending the variation caused by
s washplate movement, when the aileron or elevator is working.
Press ENT to Main Menu, use UP or DN to choose the navigation mark of enter Function Menu. Press ENT
to Swash Mix interface. The Swash Mix item is only effected after choose the two or more servos in 2.11
Swash Type .Take the third servo 120° as an example.
%Has
h tvi
v.;715;
1-1
Tvrie
Aileron
Iyv
3.
I-
1
i
a. s rl T
P
e
(-7! rvo :E;
(21...r:'
131r.;;
(1) Swash Type
This function permits the flight adjustment of swashplate behavior.The item is only active when the swashtype
is 2 servos or more in 2.11 Swash Type. The choosed swash type is the 3 servos 120° .
Setup: Enter the FUNCTION menu and select SWHMX. Press ENT to display the first of the available channels
for adjustment and it's current setting value. When swash type is set to 3 servos 120° , four options are
available, ELEV, AILE, PITCH and EXP.
(2) Aileron Mix Adjustment
In the interface of Swash Mix,press UP or DN to choose the navigation mark of Aileron Setting item. Press
R button to increase the rate and L to reduce. If reversed direction, it is available to chang through the "+" or
"-" mark. The adjustable rate is ± 125%. After finished the settings, press DN to set others.
(3) Elevator mix adjustment
The function is based on the 3 servos or more servos which
is choosed(refer to the 2.11 Swash Type). The setting
method is same as above.
(4) Pitch Mix Adjustment
The function is based on the 2 servos or more servos which
is choosed(refer to the 2.11 Swash Type). The setting
method is same as above.
(5) Exponential Curve
This function can execute the exponential changes, which are set at Dual Rate and Exponential in Function
Menu when it is started. If Off is selected, the exponential curve will be changed in the form of fold line.
3 %Nash Mi
Aileron
E I e v;Ei.to r
Setup:
Press UP or DN to touch the navigation mark of Exponential
to expand two options: Off and On. the default setting is
Off. On is recommended.
Press EXT to exit after finished.
3 'was h Mix
F' Ito h
E xp o n e nti al
3.11 Pitch Curve
Pitch curves are adjusted through 7 points, which of all the flight modes can be respectively set. There are
"Normal Mode", "Stunt Mode "and "Throttle hold" 3 flight modes.
Setup:
Press ENT to Main Menu. Press UP or DN to choose Function
Menu and then press ENT to enter Function Menu. Press UP
or DN to choose Pitch Curve, press ENT to Pitch Curve
interface, there is "All servos hold?", Press ENT to confirm
with OK for all the servos will be locked at the current states.Or
use UP or DN to Cancel for Unlocked. Enter the next interface
after confirmed OK or Cancel.
F' it° h i Li ryie
Flight t.y.lode
OE:
L I
21i134H
o n e
3.1
Off
DEVD 7E -
31
Advertisement
Table of Contents
