Table of Contents
Advertisement
Fla..p System
Status
0: Normal
Throttle Stick.
Inhibit
i]
L
Flap. 3s ,istem
Throttle Stic:k.
50, 0%
Flight lode
h
Flap Siyistem
Flight Mode
Switch
Flight Mode 1
3\vitch
Aileron to Flap
....
Pos CI Left
Oo"
/0
Pos
[I
Right
;1
'
1. 1 1
Welcome to use the DEVO 7E transmitter
cleUention
DEVO 7E
(1.1) Elevator 0:Normal position
press UP or DN to make the navigation mark choose "Elevator 0:Normal", and press R or L to change the
elevator mix amount. It is possible to change the direction by altering U or D before the amount. The default
setting is 0%, and the adjustable range is U125% - D125%.
(1.2) Land position: Please refer to "1.1 Elevator 0:Normal" setting
(2) Status
Press UP or DN to make the navigation mark choose "Status", then vibrating the flap switch(refer to 2.9 Device
select) will display current position
(3) Auto land
(3.1) Throttle stick Setup
Press UP or DN to make the navigation mark choose"Throttle stick"item,and press R or L to change value
or Inhibit. It is possible to set the position when changing the value.The default setting is "Inhibit", and adjustable
range is from 0.0 to 100.0%.
(3.2) Flight mode 0 Setup
It is possible to set a certain flight mode switch automaticly after automatic land.When do this, you must come
to "Wing type" setting interface under the Model Menu and make correspond Wing type Setup. Refer to 2.11
Wing type.
Press UP or DN to make the navigation mark choose "Flight
mode 0" item, and press R or L to 3 options :Switch, 0:Normal
and 1:Land. It is Mannul control when choose "Switch", but
Automatic control when choose Flight mode switch position.
(3.3) Flight mode 1 Setup: refer to "(3.2)Flight mode 0 Setup"
Press EXT to exit after finished.
3.15 Aileron to flap mix
The function aims at mixing flap when operating aileron stick, and can set switch. The flap dual channels
should also be previously activated at Wing Type in Mode Menu(refer to"2.11 Wing Type")
Setup:
Press"ENT" to enter into"main menu"; press UP or DN to
make navigation mark select "function menu", press "ENT"
to enter into "function menu"; press UP or DN to select
"Aileron to flap mix", press"ENT" to "Aileron to flap mix"
designed interface.
(1) Pos 0 to leftward Setup
Press UP or DN to make navigation mark select "Pos 0 to leftward setting", press R or L to change the leftward
mix value of aileron to flap, the mix direction will be revised by changing the sign of plus or minus before the
value, the adjustable range is ±125%.
(2) Pos 0 to rightward Setup
press UP or DN to make navigation mark select "Pos 0 to rightward Setup", press R or L to change the
rightward mix value of ailren to flap, the mix direction will be revised by changing the sign of plus or minus
before the value, the adjustable range is ±125%.
(3) Pos 0 to leftward Setup: refer above "(1) pos 0 to left Setup"
(4) Pos 0 to rightward Setup: refer above "(2) pos 0 to right Setup"
DEVO 7E -
63
Advertisement
Table of Contents
