Table of Contents
Advertisement
rylodel Receive
1
4 , ?
3, rd 0
4° NA D
4 '.Ff. MOD 4
model
RPcPiryie
.we
,
.Z7 It
n
Nr_l,
1
0
1E)
,re E u u r ?
Model All
Ne10 11P1 Reset
P. .4.-..-I.-.I e, 1 1
Nip, 1
Cji [: 1 '71
A r e ou sure-
Model Reset
Miod Ad I
Are s, iou s
r
s?
deVention
DEVO 7E
Welcome to use the DEVO 7E transmitter
(2) Model Receive
To receive model data, first select the model into which data should be copied, follow the process of model
selection described previously. Model receive can overwrite an existing configuration so be sure to select carefully.
Press ENT to enter the Main Menu, use UP and DN to select Model Menu, press ENT to enter Model submenu,
press UP or DN until Model Receiving is in the display. Press ENT again to confirm. An enquiry information
"Are you sure?" will be shown as below Illustration, press ENT to confirm the reception, press EXT to exit.
Cu
l
Model R c e
,
r p 0 :=; u r ?
REMOPOMEEM.PIIIIIM40.1,11M111,1.1111111MMIITIVIIITIMIPTIMMTHIMPIIMIMII
After pressing ENT to receive, the display shows "Connecting
" in the interface. The information of "Received" with
the model name will be shown after receiving is finished.
Or press EXT to exit.
Model Receive
1E1
Press UP or DN to choose the save position, an enquiry
information "Are you sure?" is shown after press ENT. Press
ENT to save or press EXT to exit.
After saving is complete the system will return to the main
menu.
Press EXT to exit after finished.
2.5 Model reset
Using the Model Reset function the settings for one or all models can be reset to the factory defaults.
It is possible to store up to 30 models data in the model list of DEVO 7E equipment. There are two methods
to reset the model data: batch reset and single reset. Here is the setup:
Press ENT to enter the Main Menu, use UP and DN to select MODEL, press ENT to enter Model sub-menu,
press UP or DN until "Model Reset" is in the display. Press ENT to get Model reset setting interface. Use R
and L to select "ALL" for all models or the individual model name for a single model reset.
After selecting ALL or a specific model, press ENT, "Are you sure?" enquiry is displayed, press ENT to confirm
or EXT to cancel.
Press EXT to exit after finished.
DEVO 7E — 18
Advertisement
Table of Contents
