Table of Contents
Advertisement
Timer
Type
Countdown
Set Time
10:00
-II
en
1!
"-.
1
.
1
tri
Timer
L
deVention
DEVO 7E
Welcome to use the DEVO 7E transmitter
(1) Countdown setting
Press R or L to select Countdown. There is an expand sub-
menu Set Time. Press UP or DN to Set Time interface, use
R or L to set up countdown time. The timing rang is from
00:10-to 60.
(2) Switch selection
Press UP or DN to move the navigational mark to Switch.There are Inhibit and available switch options, use
L or R to choose switches between FMOD SW,HOLD SW,SPSO SW, SPS1 SW, SPS2 SW and SPS3 SW.
Select the desired item except these items of SPSO SW, SPS1 SW, SPS2, and SPS3 which should be
previously set at Stick Position Switch at Model Menu(refer to "2.8 Stick Position Switch").
Press EXT after finished.
(3) Usage of timer
Use the UP key to start and stop the timer. Use DN to reset the timer.You can also set switches to control
the timer. Below is the picture of timer display on the boot screen .
Software can be upgraded in PC via downloading or uploading the configuration files.
Enter upgrading interface: Press EXT and power on the radio when the radio is in powered off status, below
illustration will show as below.
The operation guide for connecting to PC upgrading should be mentioned with upgrading software.
5.0 Hot keys usage
We offer two hot keys R+, L- for this Radio. With them, you can enter into the gyro sensor and throttle curve
setting interface quickly.
Method:Press R+ once on the main interface to enter into the gyro sensor setting interface. Press L- once,
you can enter into the throttle curve setting interface.
This symbol indicating separate collection for electrical
and electronic equipment.
DEVO 7E-70
Advertisement
Table of Contents
