Table of Contents
Advertisement
New Drum
This function is used to reset the drum counter after the drum has been replaced.
1
2
3
Page 9-28
Press the [Machine Status] key.
Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
Select [New Drum] and press
[Enter].
To set the drum counter to zero,
select [On] and press [Enter].
Otherwise, select [Off] and press
[Enter] to exit the selection.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
System Admin Tools
[Passcode Protect]
New Drum
[On]
Advertisement
Table of Contents
