Upload To A Pc Using Startdrive; More Options For The Upload - Siemens SINAMICS G120C Operating Instructions Manual
Low voltage converters
Hide thumbs
Also See for SINAMICS G120C:
- Operating instructions manual (470 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
6.4
Upload to a PC using Startdrive
Overview
You can backup the converter settings to a PC.
Requirement
The following preconditions apply:
• The converter power supply has been switched on.
• The PC and converter are connected with one another via a USB cable or via the fieldbus.
Function description
Procedure
1. Go online.
2. Select "Online" > "Upload device to PG/PC."
3. Back up the project with "Project" > "Save."
4. Wait until Startdrive signals that data backup has been completed.
5. Go offline.
You have backed up the settings.
❒
6.5
More options for the upload
Function description
In addition to the default setting, the converter has an internal memory for backing up three
other settings.
On the memory card, you can back up 99 other settings in addition to the default setting.
Further information is provided on the Internet:
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
Memory options (http://support.automation.siemens.com/WW/view/en/43512514)
Uploading the converter settings
6.5 More options for the upload
173
Advertisement
Table of Contents
