Siemens SINAMICS G120C Operating Instructions Manual page 169
Low voltage converters
Hide thumbs
Also See for SINAMICS G120C:
- Operating instructions manual (470 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
Function description
Procedure
1. Insert an empty memory card into the converter.
Note
Accidental overwrite of the converter settings
When the supply voltage is switched on, the converter automatically accepts the settings
already backed up on the memory card. If you use a memory card on which settings are
already backed up, you will overwrite the settings of the converter.
• Use an empty memory card for the first automatic back-up of your settings.
Note
Unintentional firmware update
If the memory card contains a converter firmware, the converter may perform a firmware
update after the supply voltage has been switched on.
• Before inserting the memory card, ensure that it is empty.
2. Switch on the power supply for the converter.
After the power supply has been switched on, the converter copies its changed settings to
the memory card.
❒
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
Firmware upgrade and downgrade (Page 410)
Uploading the converter settings
6.2 Uploading to the memory card
167
Advertisement
Table of Contents
