Upload To A Pc Using Startdrive - Siemens SINAMICS G120D Operating Instructions Manual
Distributed inverter cu240d-2 control unit with encoder evaluation
Hide thumbs
Also See for SINAMICS G120D:
- List manual (910 pages) ,
- Operating instructions manual (398 pages) ,
- Original instructions manual (382 pages)
Table of Contents
Advertisement
6.3
Upload to a PC using Startdrive
Overview
You can backup the converter settings to a PC.
Requirement
The following preconditions apply:
• The converter power supply has been switched on.
• The PC and converter are connected with one another via a USB cable or via the fieldbus.
Function description
Procedure
1. Go online.
2. Select "Online" > "Upload device to PG/PC."
3. Back up the project with "Project" > "Save."
4. Wait until Startdrive signals that data backup has been completed.
5. Go offline.
You have backed up the settings.
❒
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
Uploading the converter settings
6.3 Upload to a PC using Startdrive
103
Advertisement
Table of Contents
