Scope Of Delivery Converters Fsaa - Siemens SINAMICS G120C Operating Instructions Manual

Description
3.4 Scope of delivery converters FSAA ... FSC
Procedure
Procedure
To transfer OpenOSS license terms to a PC, proceed as follows:
1. Switch off the converter power supply.
2. Insert an empty memory card into the card slot of the converter.
3. Switch on the converter power supply.
4. The converter writes file "Read_OSS.ZIP" to the memory card within approximately
30 seconds.
5. Switch off the converter power supply.
6. Withdraw the memory card from the converter.
7. Insert the memory card into the card reader of a PC.
8. Please read the license terms.
3.4 Scope of delivery converters FSAA ... FSC
The delivery comprises at least the following components:
• A ready to run converter with loaded firmware.
Options for upgrading and downgrading the firmware can be found on the Internet:
You can find the article number 6SL3210-1KE..., the hardware version (e.g. C02) and the
firmware (e.g. V4.7) on the converter rating plate.
• 1 set of terminal strips for connecting the inputs and outputs
• 1 set of shield plates, including mounting materials
• Compact Operating Instructions in German and English
• The converter contains open-source software (OSS). The OSS license terms are saved in the
converter.
• 1 set of connectors for connecting the line supply, motor and braking resistor
• Only for converters with fieldbus via USS or Modbus RTU: 1 connector for connecting the
fieldbus
28
Overview of the interfaces (Page 82)
Firmware (http://support.automation.siemens.com/WW/news/en/67364620)
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters