Siemens SINAMICS G120C Operating Instructions Manual page 102

Installing
4.10 Connecting the interfaces for the converter control
Default setting 20: "3-wire (enable/on/reverse)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: 3-wIrE 2
Default setting 21: "USS fieldbus"
DO 0: p0730, DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Designation in the BOP-2: FB USS
100
AO 0: p0771[0] DI 0: r0722.0, ..., DI 4: r0722.4
AO 0: p0771[0]
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
AI 0: r0755[0]
DI 2: r0722.2
SINAMICS G120C Converters