Siemens SINAMICS G120C Operating Instructions Manual page 149

• [11]: The same setting as [1]. The motor accelerates to the currently set setpoint after the
motor data identification.
• [12]: The same setting as [2]. The motor accelerates to the currently set setpoint after the
motor data identification.
Calculating the motor parameters: Select "Complete calculation".
Set the check mark for "RAM data to EEPROM (save data in the drive)" to save your data in the
converter so that it is not lost if the power fails.
Select "Finish".
You have entered all of the data that is necessary for the quick commissioning of the
converter.
❒
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
Commissioning
5.5 Quick commissioning with a PC.
147