You have mounted the EMC connecting bracket and the shield plate.
❒
Mounting the shield plate and EMC connecting bracket, FSF
Procedure
1. If you are using a converter with an integrated line filter, then mount the EMC connecting
bracket on the shield plate
On converters without a filter, the EMC connecting bracket is not included in the scope of
supply of the converter.
2. Screw the shield module to the converter
You have mounted the EMC connecting bracket and the shield plate.
❒
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
①
.
②
using three screws, as shown in the figure.
Installing
4.4 Mounting the converter
53