Commissioning
5.8 Handling the BOP 2 operator panel
5.8.7
Why can a parameter value not be changed?
Overview
Whether or not a parameter value can be changed depends on the type of parameter and the
operating mode of the converter.
Function description
The converter indicates why it currently does not permit a parameter to be changed:
Read parameters cannot
be adjusted
The parameter can only
be adjusted during quick
commissioning.
A parameter can only be
adjusted when the motor
is switched off
Further information
For each parameter, the parameter list contains the operating state in which the parameter can
be changed.
164
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters