4. After loading, check whether the converter outputs Alarm A01028.
– Alarm A01028:
– No alarm A01028: Proceed with the next step.
5. Back up the settings so that they are protected against power failure.
You transferred the settings to the converter.
❒
10.2.1.6
Download from Smart Access
Overview
You can transfer the converter settings that are backed up on the digital terminal device back
into the converter.
Precondition
The following requirements apply:
• The converter power supply has been switched on.
• The converter settings are not protected against copying.
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
The loaded settings are not compatible with the converter.
Delete the alarm with p0971 = 1.
Recommission the drive.
Download with active know-how protection with copy protection (Page 401)
Corrective maintenance
10.2 Downloading the converter settings
387