How To Validate The Total Switch - Fuji Electric FLR-3 Instruction Manual

4.10.5.4. How to validate the total switch

Description
 Select a contact output as DO1 and/or DO2 when the total value exceeds a setting.
Settable range: 0.000001 to 99999999
Contact action:
ACTIVE ON : DO1/DO2: Normally off
ACTIVE OFF : DO1/DO2: Normally on
Note) Different values can be assigned to DO1 and DO2.
For actual keying, refer to the typical operation indicated below. Set the protection to OFF
beforehand. (See Section 4.4.1.)
Operation Set the DO1 output to "TOTAL SWITCH", and change the setting value from 10000[m
(example) Also, set the contact to "ACTIVE ON".
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
* Press the
Press the
ENT
▼
Press the
▼
line.
Press the
ENT
▼
SWITCH".
Press the
ENT
▼
Press the
▼
Press the
▼
Press the
▼
Press the
▼
Press the
ENT
▼
▼
――― "TOTAL SWITCH" has been registered. ―――
▼
▼
Press the
ENT
▼
Press the
ENT
▼
* To select normally on, press the
▼
▼
▼
Press the
ESC
the measurement mode.
- 56 -
Description
key twice to display "OUTPUT SETUP".
key once to display "ZERO ADJUSTMENT".
ENT
key for 6 times to display "DO1 OUT".
key again to display "DO2 OUT".
key once to blink the cursor.
ENT
key for 6 times to display "TOTAL SWITCH" on the 2nd
key once to display the setting screen of "TOTAL
ENT
key once to blink the cursor.
ENT
key for 3 times to move the cursor.
key for 10 times to set "0".
key twice to move the cursor.
key once to set "1".
key once to register.
ENT
key once to display "CONTACT ACTION".
ENT
key once to register "ACTIVE ON"(normally off).
ENT
key.
――― "ACTIVE ON" has been registered. ―――
key twice and then press the
ESC
Total value
Setting value
OUTPUT SETUP
ZERO ADJUSTMENT
DO1 OUT
DO1 OUT
DO1 OUT
TOTAL SWITCH
TOTAL SWITCH
TOTAL SWITCH
TOTAL SWITCH
TOTAL SWITCH
TOTAL SWITCH
TOTAL SWITCH
STATUS OUT
CONTACT ACTION
CONTACT ACTION
STATUS OUT
key for 3 times to enter
Time
ON or OFF
3 3
] to 100[m ].
Display
SET ZERO
NOT USED
NOT USED
TOTAL SWITCH
10000 m3
00010000 m3
00010000 m3
00000000 m3
00000000 m3
00000100 m3
 COMPLETE 
↓
CONTACT ACTION
ACTIVE ON
 COMPLETE 
↓
CONTACT ACTION
0.000 %
0.000 m3
INF-TN3FLR-E