5. MOUNTING OF DETECTOR
5.1. Detector mounting procedure
Perform the following steps in order for mounting the sensor on the pipe to measure.
Reference
Work item
section
5.2
Selection of mounting method
5.3
Mounting method on the pipe
For the "5.3 Mounting method on the pipe", refer to the separate instruction manual "ULTRASONIC
FLOWMETER DETECTOR".
- 74 -
: Outline steps
: Check the V/Z method, pipe size, and detector.
: Apply acoustic couplant to the detector oscillation surface, and
connect the sensor cable.
INF-TN3FLR-E