4.10.5.4. How to validate the total switch
Description
Select a contact output as DO1 and/or DO2 when the total value exceeds a setting.
Settable range: 0.000001 to 99999999
Contact action:
ACTIVE ON : DO1/DO2: Normally off
ACTIVE OFF : DO1/DO2: Normally on
Note) Different values can be assigned to DO1 and DO2.
For actual keying, refer to the typical operation indicated below. Set the protection to OFF
beforehand. (See Section 4.4.1.)
Operation
Set the DO1 output to "TOTAL SWITCH", and change the setting value from 10000[m
(example)
Also, set the contact to "ACTIVE ON".
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
* Press the
Press the
ENT
▼
Press the
▼
line.
Press the
ENT
▼
SWITCH".
Press the
ENT
▼
Press the
▼
Press the
▼
Press the
▼
Press the
▼
Press the
ENT
▼
▼
▼
▼
Press the
ENT
▼
Press the
ENT
▼
* To select normally on, press the
▼
▼
▼
Press the
ESC
the measurement mode.
Description
key twice to display "OUTPUT SETUP".
key once to display "ZERO ADJUSTMENT".
ENT
key for 6 times to display "DO1 OUT".
key again to display "DO2 OUT".
key once to blink the cursor.
ENT
key for 6 times to display "TOTAL SWITCH" on the 2nd
key once to display the setting screen of "TOTAL
ENT
key once to blink the cursor.
ENT
key for 3 times to move the cursor.
key for 10 times to set "0".
key twice to move the cursor.
key once to set "1".
key once to register.
ENT
――― "TOTAL SWITCH" has been registered. ―――
key once to display "CONTACT ACTION".
ENT
key once to register "ACTIVE ON"(normally off).
ENT
――― "ACTIVE ON" has been registered. ―――
key twice and then press the
ESC
key.
key for 3 times to enter
-59-
Total value
Setting value
ON or OFF
3
3
] to 100[m
].
Display
OUTPUT SETUP
ZERO ADJUSTMENT
DO1 OUT
NOT USED
DO1 OUT
NOT USED
DO1 OUT
TOTAL SWITCH
TOTAL SWITCH
10000
TOTAL SWITCH
00010000
TOTAL SWITCH
00010000
TOTAL SWITCH
00000000
TOTAL SWITCH
00000000
TOTAL SWITCH
00000100
TOTAL SWITCH
COMPLETE
↓
STATUS OUT
CONTACT ACTION
CONTACT ACTION
ACTIVE ON
CONTACT ACTION
COMPLETE
↓
STATUS OUT
CONTACT ACTION
0.000
%
3
0.000
m
Time
SET ZERO
m3
m3
m3
m3
m3
m3
Need help?
Do you have a question about the Time Delta-C FSV-2 and is the answer not in the manual?