Mounting Of Detector; Image Figure Of Mounting Dimension - Fuji Electric FLR-3 Instruction Manual

5.1.1. Mounting of detector

For sensor spacing, select either method in advance.

Calculate from flow transmitter
Turn ON the flow transmitter.
Enter the piping information, etc described in Section 4.6.2, and display it.
Display example: PROCESS SETTING S=16 (48mm)
During wiring work, be sure to turn the power off.

Calculate from our website.
Address http://www.fujielectric.com/products/instruments/products/flowmeter/top.html

Calculate from the CD attached to the equipment.

5.1.2. Image figure of mounting dimension

Type FSSA, FLS_12, FLS_22
Mounting
V method
method
Mounting
dimension
Type FLS_31
Mounting
V method
method
Mounting
dimension
Type FSSC
Mounting
Z method
method
Mounting
dimension
INF-TN3FLR-E
Mounting dimension
Mounting size
Mounting size
FSSC
V method
Mounting size
FLS_41
Z method
Mouting
size
- 75 -