Table of Contents
Advertisement
3.2. Installation of flow transmitter
The flow transmitter may be mounted on a wall or 2B pipe stand (option).
3.2.1. Wall mounting
For wall mounting, use two M8 bolts.
According to the mounting hole dimensions shown below, drill holes on the wall, and tighten M8 bolts.
3.2.2. 2B pipe stand mounting
When mounting on 2B pipe, be sure to use a complete set of fixtures (U bolt, support fixture, plain washer,
spring washer, wing nut) furnished if optionally designated. Tighten the wing nut by hand. If any support
fixture is not used or if the altogether is excessively tightened by tool, the wall mounting fixture may be
deformed, thereby breaking the resin case.
Mount the instrument on 2B pipe stand as illustrated below.
INF-TN3FLR-E
130
Mounting
plate
70
AUTION
Mounting hole 2-φ9
- 7 -
Advertisement
Table of Contents
