Table of Contents
Advertisement
User Guide
The file will automatically download.
4.3.2 Upgrading Firmware
This task provides instructions for upgrading firmware on the OpenFlex Data24 3200 using the OCGUI.
Before you begin:
Note:
The same procesure may be used to upgrade the test firmware. The test firmware is
indicated by the letter T , for example, OpenFlex_Data24_3200_T_FW_1.0.0.bin .
Attention:
each IOM update. Verify the health of the IOM after each firmware update.
Step 1 :
The latest version of firmware must be downloaded before continuing this upgrade procedure.
If the firmware has not been downloaded, follow the instructions in
the Support Portal (page 150)
Step 2 :
Navigate to the chassis.
Step 3 :
Click the device's OS icon:
Figure 228: Storage Device OS Icon
The Device OS information appears:
The firmware upgrade must be completed on both IOMs. Wait 5 minutes in between
.
IOM A and IOM B firmware updates will need to be completed
Attention:
separately.
4. Management
4.3 Firmware Upgrade
Downloading Firmware from
153
Advertisement
Table of Contents
Need help?
Do you have a question about the OpenFlex Data24 3200 and is the answer not in the manual?
Questions and answers